NIBE Heat Pumps

The energy consumption for heating and hot water can be lowered by up to 75% with a ground source heat pump from NIBE in comparison to heating systems using fossil fuels. NIBE provide lots of information on their website which you can access here.

Ground Source Heat Pumps

NIBE Standard Ground Source Heat Pump - NIBE F1145

NIBE Standard Ground Source Heat Pump - NIBE F1145

NIBE F1145 is a ground source heat pump for heating single and multi-family houses and industrial buildings. The latest generation NIBE ground source heat pumps are not only more efficient than previous models, but have also been designed for user friendly operation.

It ?s easier than ever to get the full benefits of this clean, cost-effective technology. Install a NIBE heat pump and you can reduce your energy cost by up to 80% - which means a dramatic reduction in both heating bills and Co2 emissions.

User Friendly

A unique, intuitive control panel lets you set a comfortable indoor climate and schedule your heating system to suit the demands of the household.

Adaptable Design

A modular design means you can add accessories such as a ventilation unit or accumulator tank without ruining the system ?s neat, streamlined appearance.

Quiet Operation

Noise levels are so low, you will hardly notice it ?s there!


NIBE Standard Ground Source Heat Pump - NIBE F1345

NIBE Standard Ground Source Heat Pump - NIBE F1345

The NIBE F1345 is one of a new generation of heat pumps, designed to supply your heating and tap water needs in a cost efficient, environmentally friendly way. With its two large scroll compressors, NIBE F1345 is the ideal ground source heat pump for large residential and commercial installations and other buildings with a large heat demand.

The intelligent system controls both compressors as necessary to give better power control, less wear and greater operational ability.

User Friendly

NIBE F1345 is equipped with a multicolour display, user friendly controls and simply upgradable software via the built in USB port.

Temperature

High flow temperature (up to 65°C) ? means great installation flexibility.

Flexibility

The new F1345 is more flexible than ever and with its advanced control system it can be adapted to several system solutions. In systems with up to 9 heat pumps and with a wide range of accessories e.g. for control of oil, gas, pellet fired or electric boilers, you find the full flexibility for your installation.


NIBE Premium Ground Source Heat Pump - NIBE F1245
National Heatpump Awards

NIBE Premium Ground Source Heat Pump

NIBE F1245 is a complete ground source heat pump unit for heating single-family houses fitted with a 180-litre hot water heater. The latest generation NIBE ground source heat pumps are not only more efficient than previous models, but have also been designed for user friendly operation. It ?s easier than ever to get the full benefits of this clean, cost-effective technology. Install a NIBE heat pump and you can reduce your energy cost by up to 80% - which means a dramatic reduction in both heating bills and Co2 emissions.

User Friendly

A unique, intuitive control panel lets you set a comfortable indoor climate and schedule your heating system to suit the demands of the household.

Abundant Hot Water

This heat pumps high efficiency means you can get all the hot water you and your family need and supplies are quickly replenished after use.

Adaptable Design

A modular design means you can add accessories such as a ventilation unit or accumulator tank without ruining the system ?s neat, streamlined appearance.

Quiet Operation

Noise levels are so low, you will hardly notice it ?s there!


NIBE Commercial Ground Source Heat Pump - NIBE F1330

NIBE Commercial Ground Source Heat Pump

Advanced ground source heat pump for large residential and commercial installations.

NIBE F1330 is a ground source heat pump for heating larger buildings such as multi-family houses and large scale industrial plants. Soil, brine or ground water can be used as an energy source. NIBE F1330 is a flexible product with advanced control equipment that offers a multitude of system solutions. NIBE F1330 can run at two different flow temperatures ? if necessary with double heat curves. It is furthermore prepared for controlling an oil fuelled or electric boiler. This ground source heat pump can be controlled in a heating system as either a "master" or "slave".

NIBE F1330 is manufactured in four versions; these feature outputs of 23, 31, 39 and 60 kW.

Due to the two highly effective scroll compressors in a refrigerant circuit of suitable size, the NIBE F1330 achieves a high efficiency. With a heat factor (COP) of at least 4.3 with an incoming cooling medium temperature of 0°C and an outgoing heating medium temperature of 35°C, the unit is an effective cost saver.

The maximum flow temperature is 65°C with compressors only.

The heat pump consists of two units which contain less than 3kg refrigerant per unit. The two compressors, which are activated when they are needed, achieve a higher output control by increased operation intervals, which leads to less wear and increased operational safety.

NIBE F1330 enables simultaneous production of heating water and hot water. The production of hot water is prioritised by the activation of one or both compressors.

NIBE F1330 is constructed in such a manner, that the compressors and refrigerant circuits are encased in separate units, which ensures safe servicing. This double sound-proofing of the compressors results in very low noise levels. Circulation pumps and flexible hoses are fitted at the factory. Cooling medium and heating circuits are connected on the back of the device. Dirt filters are included in the delivery.

The NIBE F1330 is fitted with a microprocessor to ensure optimal and safe operation. Clear information on condition, operation time and all temperatures can be read off from the LCD display. External plant thermometers are therefore not necessary.

NIBE F1330 features a robust frame with a strong outer casing. Effective sound-proofing guarantees low noise levels and therefore increased living comfort. Detachable front and side panels make the installation and servicing easier.

Nine NIBE F1330 can be connected together via a control unit to achieve an output of up to 540kW. It is also possible to cool via brine on hot summer days.

NIBE F1330 can be installed in different ways. Necessary accessories would be for example the room sensor "RG 10" or the equipment for hot water control "VST 11", the temperature signal distributor "TSF 10" and other equipment.


Air Source Heat Pumps

NIBE Air Source Heat Pump - NIBE F2040

NIBE Air Source Heat Pump - NIBE F2040

Air source heat pumps for residential use & they include inverter controlled compressor, compact design, built-in condensate water tray, cascade options & are MCS Approved

Special Attention

These NIBE products have been developed with special attention to making installation as smooth as possible. For example we always include anti-vibration water connection with the outdoor unit. A broad accessory programme is available and there are numerous recommended possible combinations.

Design

The F2040 are new air source outdoor units that are particularly suitable for domestic buildings. Great effort has been made to create attractive system combinations.

Domestic Use

The NIBE monobloc air source range consists of the NIBE F2040 8, 12 and 16kW for domestic use. The updated programme gives a complete coverage of building heating power demand in the 5 -1 6 kW range.


NIBE Air Source Heat Pump - NIBE F2300

NIBE Air Source Heat Pump - NIBE F2300

NIBE air source heat pump for commercial & domestic use. They include COP levels which are among the best on the market, supply temperature 63 °C at -25 °C ambient, very low noise level, works down to -25C, built-in condensate water tray, are MCS approved & have benchmark checklist

Noise Level

Special attention has been given to minimizing the noise level. F2300-20 kW is one of the quietest units available on the market.

Installations

These NIBE products have been developed with special attention to making installation as smooth as possible. For example, we always include anti-vibration water connections with the outdoor unit. A broad accessory programme is available, and there are numerous recommended possible combinations.


NIBE Air Source Heat Pump - NIBE VVM 320

NIBE Air Source Heat Pump - NIBE VVM 320

NIBE VVM 320 is a complete indoor module and together with the NIBE ?s F2040 air source heat pump range creates a complete system to supply the building ?s heating and hot water requirements.

NIBE VVM320 is ideal for new build dwellings taking up limited space with plug and play installation offering a host of additional applications.

User Friendly

User friendly, self-instructive controller with easy to read large multi-colour display.

Temperature

Weather compensation with indoor temperature sensor.

Self Regulatory

Self-regulating, speed controlled A-class design circulation pump.


Send a Quick Quote Request

New Call-to-action